Categories
Mazda DIY Car Repair Tips

How to Reset Mazda Connect Infotainment System

How to reset the Mazda Connect infotainment system if you have issues such as the screen going blank or freezing, connecting to Apple CarPlay, or not displaying anything. I had problems with my Mazda backup camera showing a black screen, which the reset fixed. Other issues the Mazda Connect, including Samsung Mirror and Android auto, wouldn’t connect before resetting. Ensure that nothing is connected to the infotainment system when performing the reset procedure. Also, make sure your car is not started; just turn the ignition on. Finally, if the infotainment unit is getting no power at all, I would with checking your fuses.

Categories
BAD DRIVERS ON DASHCAM

BAD DRIVERS CAUGHT ON DASHCAM

In this video you can see what looks to be an insurance scam accident, caught on my dashcam. The driver stops the car and puts it in reverse, hitting the car behind him! Then gets out of the car, leaving it in reverse, with his car pushed against the other car! I am very lucky that I was not in the lane over as this would have happened to me. I feel safer since I have a dashcam so, if this was an insurance scam, I would be able to explain easily what happened. Can you imagine being in the Bronx New York when something like this happens to you? Would you wish you had a dashcam? 🎥Link to dashcam I use https://amzn.to/3WfC9xn [Affiliate Disclaimer Below] 💾Link to micro SD card I use in my dashcam https://amzn.to/3HTzC7r [Affiliate Disclaimer Below] Affiliate disclaimer, this means I receive a small commission on a purchase without additional cost to you, if you buy something through my 2 links provided in this description. The purpose of this video is to educate the viewers and share my experience, which includes product recommendations. I do believe in the products I mention in my video and have experience with them. I will never promote a product I haven’t tried or think you’ll benefit from. If you do purchase through my affiliate link, THANK YOU! #dashcam #baddrivers #caughtoncamera

Categories
VW Car Repair DIY

How To Reset VW Infotainment Screen Black

How to reset Volkswagen UI system, if your center screen goes blank. When resetting nothing should be connected with the infotainment.

Categories
VW Car Repair DIY

VW Engine Code Instrument Cluster Trick

Where to VW Jetta and Passat engine code, instrument cluster trick. I briefly show where the common spots to locate the vehicle data label are where engine code, paint code and optional equipment is labeled. This procedure is done with the ignition in position 2 but the car not started. It is important to know the engine code when buying certain parts for your car.

Categories
Audi DIY Car Tips

How To Adjust Steering Wheel Audi

How to adjust the steering wheel position on a Audi A3. If your steering wheel feels too close, too far, too high or too low this procedure will show you how to adjust the steering wheel to the most comfortable position for you. This procedure will be similar for most Audi’s with the same design. Certain Audi’s will have electronic adjustment, which will when pressing the corresponding buttons, in the direction you want the steering wheel to adjust.

Categories
Chrysler 300 Car Help

Set the Time Chrysler 300

This video will show you how to set the clock on a Chrysler 300. This will show you how to change the time in both the analog clock and the radio display, along with how to display the clock on the touchscreen.

Categories
Audi DIY Car Tips

How to Reset Service Audi A6 C5 (1999-2005)

How to reset service indicator on Audi A6 years 1999 to 2005. This service reset was performed on an Audi A6 Allroad. Steps to perform reset: 1. Turn the ignition OFF 2. Press and hold the button on the right side of the instrument cluster 3. While holding the right button, turn the ignition to position 2 without starting the car. 4. Immediately after turning the ignition to position press and hold the left button on the instrument cluster while the word SERVICE is displayed. It is necessary to press and hold the left instrument cluster button while SERVICE is still displayed. 5. Service reset is completed when SERVICE in 10,000 miles is displayed.

Categories
Audi DIY Car Tips

How to Program Audi Key – Synchronizing Remote Control Key Audi

How to synchronize your Audi key if your key FOB stops working. This can happen for many reasons including battery change and using the key FOB too many times out of range.

Categories
Super Car Spotting

3 Must Know Gas Hacks

3 MUST KNOW FUELING TIPS!

Categories
Audi DIY Car Tips

How To Activate Launch Control Audi A3 / S3

How to use launch control on Audi A3 and S3 (8V) 2013 to 2020.